Roof Panel Roll Forming Machine Combined With Flat Cutting Machine
Roof Panel Roll Forming Machine Combined With Flat Cutting Machine
Introduction
This Roof Panel Roll forming machine is combined with flat cutting machine, so this line is two-in-one machine exactly.
1. If end user needs to roll forming roof panels, adjust the flat cutting at the beginning end of line at correction position, the flat cutting will work as pre-cutter of this producing line.
2. When end user only need flat cutting, we can adjust the flat cutting section a little lower and make the iron cover as platform for collecting roof sheet panels.
There is pre-cutting type roof panel roll forming machine, so there is no post hydraulic cutting section for this producing line.
Machine Working video
Roll Forming machine Accessories
| Whole Machine Main Accessories | |
| 5tons hydraulic decoiler | 1 set |
| Main roll forming machine | 1 set |
| Hydraulic cutting off system | 1 set |
| PLC control system | 1 set |
| Product rack | 3 units |
Main Parameter
| Raw Material Parameter | |
| Suitable material: PPGI, tension grade: ≤550mpa | |
| Material thickness: 0.3-0.7mm, 0.5mm inspection (common used) | |
|
Effective width: 1220mm; Material feeding width: 1015 mm |
Entry Bench&Manual Pre-shearing Device
Can cut coil tail automatically, only used for cutting off material tail
Sheet Metal Roofing Roll Forming Machine
| H400 steel for machine frame, Feeding section with guide, with hand wheel | |
| Gear/ sprocket driving: 15 steps to form | |
| Shafts Diameter=ф75mm, Precision Machined | |
| Rollers manufactured from 45 # steel, CNC lathes, hard Chrome Coated | |
| Main motor =7.5KW, Frequency speed control | |
| Forming Speed: 15-20m/min | |
|
All chains, sprockets and gears covered by iron safety cover |
|
| With pushing type mesh safety cover for roll forming part | |
|
|
|
PLC Control System |
|
| Control the cutting length & quantity automatically | |
| Combined with:PLC(delta, Taiwan), inverter(Delta Taiwan), Touch Screen (delta, Taiwan), Encoder (Omron), etc | |
| Cut-to-length tolerance≤±2 mm | |
|
Control voltage 24V
So we can custom manufacture kinds of roll forming machines according to end user's requirements. Contact us immediately. |
