Steel Rain Spout Roll Forming Machine With Elbow Section
Steel Rain Spout Roll Forming Machine With Elbow Section
Machine Description
This custom steel rain spout roll forming machine is square shape, it is the union line combines with 3 tons decoiler, roll forming machine, hydraulic cutting device and product racks. If user needs the steel pipe elbow machine together, we can do manufacture it also.
Normally, the rain gutter has round shape design, square design and groove shape design. YX180-170 steel rain gutter roll forming machine is the popular type of groove shape design. We are the China roll forming machines factory, if you have any customized design, show us, and we can personally design for you also. Welcome to contact with us for more of your other steel structure project machines!
Profile Design Drawing
Technical Parameter
| Machine Component | Specification |
| 3Tons Manual Deocoiler | 1) Coil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm； |
|
|
2) Taper wedge expanding system |
|
|
3) Load Capacity: Max. 3 Tons; Coil Width Max. 1250mm； |
| Steel Rain Gutter Roll Forming Machine | 1) Gear/Sprocket driving; 14 stations roll forming |
|
|
2) Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished. |
|
|
3) Shafts Diameter=ф75mm, Precision Machined, fine Polished |
|
|
4) Main motor =7.5KW, Frequency speed control |
|
|
5) Max Line speed of roll Former: Approx. 8-15m/min |
| Hydraulic Cutting Device | 1) Stop to cut, Post cut, slug cutting |
|
|
2) Cutting tool material: Cr12, Heat treatment |
|
|
3) Hydraulic unit, Pump motor =4KW |
| PLC Control System | 1) Control the quantity & cutting length automatically |
|
|
2) Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc |
|
|
3) Cut-to-length tolerance≤±2mm |
|
|
4) 24V Control voltage |
|
|
5) Controller with forward/backward/emergency stop buttons |
| Product Rack | Un-powered, 3 units |
Square Pipe Elbow Machine
The square pipe elbow machine is the attached machine of rain spout roll forming machines. It is driven by hydraulic station, the elbow angle can be 45 degree or 90 degree. All the settings can be finished on PLC screen.
