Home >>Products Line >>Steel Door Roll Forming Machine

Big Metal Door Frame Roll Forming Machine

Product Name: Big Metal Door Frame Roll Forming Machine


The Big Metal Door Frame Roll Forming Machine to produce the big metal door frame, it can be customed according to buyer's design drawing, normally, the thickness range is 1.0-2.0mm.

After we finish the Big Metal Door Frame Roll Forming Machine, we will test the machine by steel material and adjust the machine several times to be sure the machine have a perfect status and when customer receive the machine, the machine can be used very easy. If neccesary, buyer can come to our factory to run the machine also.

steel door frame roll forming machines

Machine Description
1.Suitable Plate Material: thickness 1.5-2.5mm, Galvanized steel or cold rolled steel
2. Working Speed: 12-15 meters / min
3. Forming Steps: 20 stations
4. Material of Roller: Gcr15, Quench HRC58-62 Plated Chrome
5. Material of Shaft: 45# Advanced Steel (Diameter: 75/95mm), thermal refining
6. Driven system: gear box drive
7. Main Power with reducer:11KW
8. Cutting: Hydraulic Cutting Cr12mov
9. Material of Cutting Knife: Cr12Mov, Quench HRC58-62
10. Hydraulic Station Power: 5.5KW
11. The whole machine is controlled by industry computer-PLC.
12 PLC--Siemens, Japan English and Chinese Language
13 Touch Screen-- Siemens Japan
14. Encoder--Omron, Japan
15 Electric parts--Schneider

Technical Parameter
A. Manual Decoiler

(1) Max Width: 1250mm
(2) Inner Diameter: 500mm
(3) Outer Diameter: 1200mm
(4) Max Weight Capacity: 5T

B. Big Door Frame Roll Forming Machine
(1) Raw Material: Colored steel or galvanized steel
(2) Material Thickness: 1.5-2mm
(3) Working Speed: 8-12m/min; Adjustable
(4) Rollers: 20 rollers ( based on drawing )
(5) Material for Rollers: GCr15, polished, heated, quenched HRC55-60°
(6) Motor Power: 15KW
(7) Roller Diameter: 76mm
(8) Machine Side Plate Type: Guide Pin Type
(9) Transmission Type: Chain Transmission
(10) Appearance Size: About 10000mm x 1300mm x 1200mm
(11) Total Weight: About 8T
(12) Finished Sheet Product as Stipulation: GB/T 12755-91

C. Hydraulic Cutting
(1) Cutting Type: Hydraulic, automatic cutting
(2) Blade Material: Cr12 with polished, heated, quenched HRC 60-62
(3) Power: 3KW

D. Control System
(1) Electrical Control: PLC Frequency Control System with touch screen
(2) Voltage: 380V/3Ph/50Hz(or as your local standard)
(3) Length Error: ±1mm

E. Output Table
(1) It is simple and used to load finished product
(2) Length: 4m
Working flow
Uncoiling—Feeding&Leveling--Punching Device---Roll forming—Cutting—Products collecting

Profile Design Drawing For Door Frame Roll Forming Machine

This steel frame roll forming machine is suit for 1.0-1.5mm material thickness and below is the raw design drawing for reference:

xiamen door frame roll forming machine factory

door roll forming machine for sale

1. One 40ft container for loading one set machine with manual decoiler;
2. The whole Wiped Anti Rust Oil, PLC controller covered by foam film;
3. Spare parts and some small parts packed in plastic tooling box;
4. All Components Fixed by steel wire with Container.