Home >>Products Line >>Roof Sheet Roll Forming Machine

Steel Metal Roof Roll Forming Equipments, PU Foaming Roof Roll Forming Machine

Steel Metal Roof Roll Forming Equipments, PU Foaming Roof Roll Forming Machine


Description


Strictly speaking, this Steel Metal Roof Roll Forming Equipments, PU Foaming Roof Roll Forming Machine is specially to traditional design. This is only a part of PU foaming heat insulation wall panel roll forming line. We roll forming the steel roof part at first, then the formed well roof goes into PU foaming section, after foaming the PU roof panel will be cut off together at the line end.


This roll forming machine prodcues metal sheets from 1219mm width and 04-0.8mm thickness. The tranmsission type is chain-sprocket; control system is Delta PLC with Omron encoder, cutter is hydraulic type, stop to cut.


The Steel Metal Roof Roll Forming Equipments, PU Foaming Roof Roll Forming Machine is formed by 30 stations rollers, need about 40GP*1 +20GP*1 container to loading. There are also one uncoiler, one control cabinet, one hydraulic oil pump and three runout-tables in the container.



Technical Parameter


Machine ComponentSpecification
5Tons Manual DeocoilerCoil Inner-diameter=510±30mm. Coil Outer-diameter Max. 1300mm;
Taper wedge expanding system
Load Capacity: Max. 5 Tons; Coil Width Max. 1250mm;
Steel Metal Roof Roll Forming Equipments, PU Foaming Roof Roll Forming MachineGear/Sprocket driving; 30 stations roll forming
Rollers manufactured from 45# steel, CNC lathes, hard Chrome Coated, fine polished.
Shafts Diameter=ф75mm, Precision Machined, fine Polished
Main motor =11KW, Frequency speed control
Max Line speed of roll Former: Approx. 10-20m/min
Hydraulic Cutting DeviceStop to cut, Post cut
Cutting tool material: Cr12, Heat treatment
Hydraulic unit, Pump motor =5.5KW
PLC Control SystemControl the quantity & cutting length automatically
Combined with: PLC (Delta), Touch Screen (Delta), Encoder (Omron), etc
Cut-to-length tolerance≤±2mm
24V Control voltage
Controller with forward/backward/emergency stop buttons
Product RackUn-powered, 3 units



Steel Metal Roof Roll Forming Equipments Single Roof Picture for Reference


Two pieces of single roof joint together and whole surface is flat, this is before PU foaming only. 



custom steel roof roll forming machine.jpg


Steel Roof Sheet Product Application


1. A stylish and attractive design,giving the apperance of a traditional roof.
2. Good for heat insulation, noise insulation.

3. The raw material can be changed different color, elegant and noble looking. Before PU foaming, whole machine is the same manufacturing process as common used roof roll forming machine.



For more information, pls contact


Skype: iwranni


Whatsapp/ wechat: 0086 15959271231


QQ: 1404805737